| ULTRASONIC
WALL THICKNESS |
| STANDARD GAUGES |
Model |
|
|
| TI-25LT |
Economical steel only model |
| TI-25P |
Programmable Wall Thickness
Gauge factory set for steel with adjustment for any other material using a
computer |
| TI-44N |
Low cost / general purpose with
integrated probe-cable |
| TI-45N |
Low cost / general purpose |
| TI-45N-HD |
Low cost /general purpose with
rubber protective sleeve |
| TI-25M |
General purpose, starting
at 0.025" (0.60mm) |
| TI-25M-WOP |
Ultrasonic Thickness
Gauge WITHOUT PROBE |
| TI-25M-102 |
General Purpose, starting
at 0.040" (1.00mm) |
| TI-25M-MMX |
Standard thru paint to 1"
(25mm) wall |
| TI-25M-MMX-H |
Standard thru paint to 1"
(25mm) wall with high temperature probe |
| TI-25M-MMX-EXT |
Extended range thru paint to
5" (127mm) wall |
| TI-25M-MMX-UWM |
Underwater thru paint |
| TI-25M-H |
High temperature (650 °F / 343
°C) Use of CF-2H high temperature couplant (p. 4) suggested |
| TI-25M-107 |
Cast iron / plastics |
| TI-25M-107-H |
High temperature (650 °F / 343
°C) Use of CF-2H high temperature couplant (p. 4) suggested |
| TI-25M-UWM |
Underwater gauge |
| TI-25M-2120 |
Engine blocks |
| TI-25M-PR8 |
Cylinder wall/engine block |
| TI-25M-162 |
Race gauge with T-162-21 10
transducer |
| TI-25M-HW |
Heavy wall
(0.040–19.999" / 1.27–508mm) |
| TI-25S |
Selectable wall thickness
gauge with 8 preset and 2 custom calibrations |
| MX-1 |
Wall thickness gauge with
key selectable velocity |
| MX-2 |
Wall thickness gauge with
key selectable velocity |
| TI-007 |
Precision thin-wall
gauge for non-corroded metals |
| TI-007-GT |
Precision thin-wall
gauge for non-corroded plastics and metals |
| TI-CMX |
Ultrasonic Coating
and Wall Thickness Gauge |
| TI-CMX-H |
High temperature (650 °F / 343
°C) Use of CF-2H high temperature couplant (p. 4) suggested |
Nhận xét
Đăng nhận xét